Filter By:
- Parts & Accessories (72)
- Pedals (165)
- Show More Brands
- Show Fewer Brands
Pedals
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

$8.99
- High impact Resin multi-use body with integrated cage
- Externally sealed ball bearing system
- 100mm x 82mm platform
- Weight: 316g pair (9/16")

$8.99
- High impact Resin platform with integrated pins
- Heat-treated Boron spindle
- Externally sealed ball bearing system
- Weight: 290g pair (9/16"), 360g pair (1/2")

$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals.
- Provide durability and improved safety
- Mix and match with the longer stock pins to customize your ideal amount of grip

$9.00
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm

$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs

$9.99
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)

$9.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 440mm length

$9.99
- Large Resin toe clip design
- For road, hybrid or mountain pedal use
- Fits most pedals that allow toe clip mounting
- Hardware included

$9.99
- Strapless resin construction
- Strapless design
- Tough and lightweight, ideal for urban conditions with frequent stops

$9.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action.
- 2pcs IGUS self lubricating bushing
- 2pcs O-ring
- 2pcs stainless shim washer

$9.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included

$10.00
- Nylon construction
- Intended for use with double-strap toe straps (sold separately)
- Includes mounting hardware
- 36 grams per pair

$10.00
These 3mm stackers can easily correct the common issue of leg length inequality.
- External cleat lift for addressing leg length inequality.
- Shaped to fit SPD-SL, Look Keo, and Speedplay Zero pedals.
- Includes longer screws.
- Package includes two cleat stackers.

$11.00
Dimension Mini Toe Clips
- Toe clips do not accept toe straps
- Sold as a pair
- Mounting hardware for the toe-clip is included

$11.00
Dimension Toe Clips and Straps Set.
Includes:
- 4 bolts
- 4 nuts (washers included)
- 2 nylon toe straps
- 2 toe clips

$12.99
Replacement bearings and bushings specific to Spoon 90 (Small) and 100/110 (Medium and Large) pedals. Eliminates play that can develop over time, and revives performance.
Includes:
- Sealed Bearing x2pcs
- 10mm IGUS Bushing x2pcs
- Green Friction Seal x2pcs
- Locknut
- O-ring x 2pcs

$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated.
- High-strength plastic composite

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Mallet E
- Model years 2016 – present

$14.99
The Thermalite pedals feature a concave, low profile design and are molded with Thermalite nylon material.
- Micro knurling with 24 pins for traction
- Recessed end to prevent damage to bearing cover
- Chromoly spindle with 6mm broach and 15mm wrench flats
- Weight: 391g
- Pedal Body Material: Composite/Plastic

$15.99 - $19.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.

$15.99
- Strapless design is easy to engage without fully committing to the pedal
- No special shoes required
- Improves pedaling efficiency
- Molded from unbreakable nylon
- Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase
- Includes mounting hardware. Note: metal plate may not be required during installation.
Page 1 of 8
Next page