Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$3.99
- Aheadset preload adjusting bolt
$9.99
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$10.99
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
$11.99
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$19.99
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
$21.99 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.00 - $37.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.99 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$28.99 - $62.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$28.99
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
$40.00 - $59.99 $40.00 - $59.99 Up to 17% Off
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
$109.99
For the stop/start world of cyclocross, Avid makes the inimitable Shorty Ultimate Rim Brake. The ideal balance of power, control and weight, the Ultimates are the choice of pro crossers across the globe. They offer an open design that clears mud quickly while also dishing out serious stopping power and modulation. Just a twist of the in-line cable adjustment knob lets you dial in cable tension, and you can choose between a wide or narrow stance for increased mud clearance or power. And, the Shorty uses standard road cartridge pads for easy maintenance.
$6.99
- Pre-stretched, Teflon coated 19 strand inner wire - 1800mm length
$103.99
The Box Four cassette adapts our Prime 9 philosophy of durability, simplicity, and reliability at a great price point. All cogs are stamped from steel, given our durable black coating and then the larger cogs are pinned to each other with spacers for easy installation.
$34.99
- Compatible with both American and Mid style BB shells - 6061-T6 full CNC alloy construction - Anodized surface finish - Weight: 255g - Cup Type: Press Fit - Cup OD/Bearing OD: 41mm or 51mm
$45.99
Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm
$81.99
Campagnolo's Record 11-Speed Chain is the right choice for Campagnolo 11-speed drivetrains. This fine chain is engineered for excellent strength, long wear and brilliant shifting thanks to a unidirectional design and an anti-friction treatment that lets it glide across your cassette. It also boasts hollow pins to keep your bicycle as light as possible.
$108.99
Features three sealed cartridge bearings. - Fits Daytona, Racing Triple, Centaur, Veloce and Mirage, 1193 and later Athena and pre-1995 Record and Chorus - 115mm spindle recommended for triple cranks and 32 or 35mm seat tubes - Unique taper is not compatible with Shimano - Weight: 233 grams
$2.99
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$13.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction - Allows the installation of a straight steerer fork without changing out the headset lower
$15.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction
$23.00
Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 26 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill • Upper Stack Height: 22 mm • Weight: 205 g
$29.99 - $44.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$50.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$135.99
The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups
$169.99 - $224.99
The latest generation Thudbuster LT is superior to its predecessor in every way.  Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 90mm - Weight: 750g (31.6mm) - Max Rider Weight: 250lbs
$124.99
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm
$448.99
BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, found on cranks from Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. 24mm spindles easily fit through the shell and allow for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet
$499.00 - $599.00
This is an updated version of the Oversized Pulley Wheel System for Shimano 9100/9150 and 8000 SS/8050 SS. This new design has an integrated stop tower for easier mounting. The CeramicSpeed Oversized Pulley Wheels System has been proven to be the fastest pulley system in the world, providing energy savings starting at 2.4 watts compared to standard Shimano systems. The OSPW System for Shimano 9100/9150 and 8000 SS/8050 SS is an industry-leading product, chosen by many of the world's leading cycling teams and professional triathletes. It features a 13-tooth upper pulley wheel and a 19-tooth lower to provide absolute optimization of the rear derailleur, and these oversized aluminum pulley wheels come fitted with either standard or coated CeramicSpeed Bearings: your choice. The Shimano 9100/8000 OSPW system is compatible up to a 32 tooth cassette for both Dura Ace & Ultegra derailleurs The typical overall power savings of the OSPW System for Shimano 9100/9150/8000 is 30%-60% over a stock setup. The oversized pulley wheels have lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. Please note: The OSPW System for 9100/9150 and 8000 SS/8050 SS is NOT compatible with Ultegra 8000-GS or 8050-GS (medium cage) derailleurs, nor with the clutch-equipped Ultegra RD RX800 & RX805. Choose CeramicSpeed's OSPW X for Shimano RX800/805 for a compatible RX800 & RX805 version. For a compatible upgrade for Ultegra 8000-GS or 8050-GS choose their Pulley Wheels for Shimano, 11s NW. In The Box: - A complete 13-tooth/19-tooth OSPW System - CeramicSpeed Bearing Oil in 15ml dropper bottle
$57.99
Stack headset spacer kits from Chris King. - Includes 3mm, 6mm, 12mm, and 25mm
Page 1 of 19 Next page